![Gate Titan V2 Programmable MOSFET [Basic Module] (REAR WIRED) - ssairsoft.com](http://store.ssairsoft.com/cdn/shop/products/GATE-TTN2-BR_MED.jpg?v=1617916786&width=640)
![Gate Titan V2 Programmable MOSFET [Basic Module] (REAR WIRED) - ssairsoft.com](http://store.ssairsoft.com/cdn/shop/products/GATE-TTN2-BR_MED_1024x.jpg?v=1617916786)
/
Description
Specifications
Brand: Gate
Compatibility: Version 2 AEGs
TITAN with ADVANCED firmware edition: No
TITAN with BASIC firmware edition: Yes
USB-Link: No
USB-A Cable for USB-Link: No
USB-C Cable for USB-Link: No
Micro-USB Cable for USB-Link: No
Tactical Programming Card: No
Package Includes: 1X Titan V2 Module (Basic Firmware), 1X Installation Kit, 1X Quick Start Guide
Adjustment Options
Trigger sensitivity
Fire selector mode
Battery protection
Sniper delay
Features
Trigger Sensitivity Adjustment: Five trigger sensors allow you to control trigger sensitivity. You do not have to disassemble your AEG. Just use the Tactical Programming Card or the GATE Control Station App to adjust the trigger to your preferences and level of skills.
Configurable fire selector: Two selector sensors allow you to use up to six fire selector modes, including innovative SEMI-BURST-AUTO mode
Cycle Detection: Thanks to the gear sensor, TITAN precisely detects in which position the cycle should finish. Therefore, even the shortest trigger action produces at least one full cycle
Burst (Gen. 2): The burst enables you to shoot a pre-determined number of BBs, which is very useful in MILSLIM and when using low-caps.
Smart Trigger: We know how vital the fast trigger response is during combat. This is why we have developed the Smart Trigger function. It enables you to achieve a faster trigger response.
AUG Mode: Enjoy two stage trigger. Activate AUG Mode and set two different trigger sensitivities. Pulling the trigger slightly produces SEMI or BURST fire and pulling the trigger further produces BURST or AUTO fire (depending on the fire selector mode).
Battery Protection: Protection against Over-Discharge of the Battery. Modern LiPo and LiFe batteries are very sensitive to over-discharge. If you do not want to damage the battery and you care about its service life, this protection is indispensable. The microprocessor monitors the battery voltage constantly. When the voltage drops down to a critical level, it will not allow firing.
Low Battery Warning: When the battery voltage drops to a predefined level, the motor will vibrate at regular intervals.
Adaptive Active Break: It automatically adjusts the motor's braking power according to your needs. This prolongs the lifespan of the motor.
Built-in Self Test: his allows you to quickly check whether the drop-in module is working properly. It helps to locate where the problem lies when anything goes wrong.
Deans Ready: The product has factory-fitted low-resistance deans-t connectors
Mini-Tamiya Adapter: Thanks to the Mini Tamiya Adapters included in the kit, you can smoothly connect the drop-in module to your original (stock) installation.
14.8V LiPo Ready: The drop-in module can be used with batteries up to and including 14.8V LI-PO. The minimum operating voltage is 3V and maximum is 17V.
Brand: Gate
Compatibility: Version 2 AEGs
TITAN with ADVANCED firmware edition: No
TITAN with BASIC firmware edition: Yes
USB-Link: No
USB-A Cable for USB-Link: No
USB-C Cable for USB-Link: No
Micro-USB Cable for USB-Link: No
Tactical Programming Card: No
Package Includes: 1X Titan V2 Module (Basic Firmware), 1X Installation Kit, 1X Quick Start Guide
Adjustment Options
Trigger sensitivity
Fire selector mode
Battery protection
Sniper delay
Features
Trigger Sensitivity Adjustment: Five trigger sensors allow you to control trigger sensitivity. You do not have to disassemble your AEG. Just use the Tactical Programming Card or the GATE Control Station App to adjust the trigger to your preferences and level of skills.
Configurable fire selector: Two selector sensors allow you to use up to six fire selector modes, including innovative SEMI-BURST-AUTO mode
Cycle Detection: Thanks to the gear sensor, TITAN precisely detects in which position the cycle should finish. Therefore, even the shortest trigger action produces at least one full cycle
Burst (Gen. 2): The burst enables you to shoot a pre-determined number of BBs, which is very useful in MILSLIM and when using low-caps.
Smart Trigger: We know how vital the fast trigger response is during combat. This is why we have developed the Smart Trigger function. It enables you to achieve a faster trigger response.
AUG Mode: Enjoy two stage trigger. Activate AUG Mode and set two different trigger sensitivities. Pulling the trigger slightly produces SEMI or BURST fire and pulling the trigger further produces BURST or AUTO fire (depending on the fire selector mode).
Battery Protection: Protection against Over-Discharge of the Battery. Modern LiPo and LiFe batteries are very sensitive to over-discharge. If you do not want to damage the battery and you care about its service life, this protection is indispensable. The microprocessor monitors the battery voltage constantly. When the voltage drops down to a critical level, it will not allow firing.
Low Battery Warning: When the battery voltage drops to a predefined level, the motor will vibrate at regular intervals.
Adaptive Active Break: It automatically adjusts the motor's braking power according to your needs. This prolongs the lifespan of the motor.
Built-in Self Test: his allows you to quickly check whether the drop-in module is working properly. It helps to locate where the problem lies when anything goes wrong.
Deans Ready: The product has factory-fitted low-resistance deans-t connectors
Mini-Tamiya Adapter: Thanks to the Mini Tamiya Adapters included in the kit, you can smoothly connect the drop-in module to your original (stock) installation.
14.8V LiPo Ready: The drop-in module can be used with batteries up to and including 14.8V LI-PO. The minimum operating voltage is 3V and maximum is 17V.